Many CBD vape cartridges on the market today are CUT with either PG/VG, MCT, or other unnatural chemical carriers. These additives produce a thinned out, free flowing finished product and maximize profits by “spreading out” the CBD milligrams to as many products as possible. FTP doesn’t do this. This cartridge is a pure, 100% chemical-free, organic CBD vaping experience with maximum milligram potency. Extra maintenance is required, but every ingredient is RAW and grown from the earth.
Does CBD Wax vaping require more maintenance?
Yes! Since the oil inside is UNCUT, it solidifies quickly and must be warmed to keep everything towards the bottom of the cartridge. The double-click preheat function on your battery is very important. Colder weather may call for other heat sources like a heat gun, small flame, heater, or other source of warm air. This cartridge is made of 100% quartz and is built to withstand high heat. Make sure you LET THE MOUTHPIECE COOL after heating your cartridge.
Note: The wax can be vaped while thick, it does not need to be fully liquid. There is little to no maintenance required if you keep the cartridge UPRIGHT as much as possible. Keeping the oil at the bottom of the cartridge and not letting it solidify while it’s laying down on it’s side is the easiest way to maintain your cartridge. Priming is NO LONGER NEEDED for any CBD For The People Cartridges!
How It’s Made
Master Batch Extraction Using Supercritical CO2
The delicate extraction process to get FTP’s amazing CBD begins at their suppliers’ certified GMP facilities. Supercritical CO2 is pumped through the hemp plant material to collect the first step of extraction, the dark master batch – this is the foundation from which all their products are born. The master batch is 100% full-spectrum, and lab tested at every level before moving into the next steps of distillation and winterization. The master batch extract at this level is very dark, thick and nutrient dense.
Grade 1 Distillation
Every step of distillation from this point on “condenses” the extract and brings the percentage of CBD higher. See on the lab results how the CBD content goes up from the master batch. Distillation condenses the thick extract allowing stronger CBD percentages as we move up the ladder.
At this step we have FTP’s Dark Raw, used to make their tinctures, salve, and softgels. This dark raw is packed full of natural plant nutrients, and as you can see the CBD content has gone up due to grade 1 distillation while still keeping THC content below the legal limit of 0.3%. It takes over 2 grams of master batch raw to make just 1 gram of dark raw.
Grade 2 Distillation
X1 – Blonde Raw
This level of distillation condenses the dark raw further, filtering out most of the darker plant material to create a perfect, vape-able raw wax, now a beautiful blonde color. This is what they use in their original X1 30% wax cartridges. Again, see on the lab results how the CBD content goes up again due to grade 2 distillation while still keeping THC content below the legal limit of 0.3%. It takes almost 2 grams of dark raw to make just 1 gram of their blonde raw.
Grade 3 Distillation
X2 – Amber Raw
This level of distillation condenses the blonde raw even further to a rich amber color. This amber raw is used to make their powerful X2 cartridges. CBD at this 65% level is extremely potent and can crystallize from time to time. This happens because CBD is a large molecule and wants to crystallize at high levels. See again on the lab results how the CBD content has risen drastically due to grade 3 distillation while still keeping THC content well below the legal limit of 0.3%. It takes roughly 2.5 grams of X1 blonde to make just 1 gram of X2 amber raw.
Grade 4 Distillation
X3 – Gold Raw
Here we basically have Grade 3 distillation on steroids. By utilizing state-of-the-art technology, hemp extract can be refined well past 80% CBD while still PRESERVING some of the phytonutrients from the original plant and reducing THC to nondetectable levels. This highly crystallized, SUPER CONCENTRATED wax is used in their X3 and XN cartridges; their X3 likes to turn to rock candy (which is why they only recommend using it with the EliteHEAT battery), but CBN stays liquid which keeps the XN nice and flowy with 70+% cannabinoids. It takes about 1.5 grams of X2 AMBER RAW to make 1 gram of our X3 GOLD RAW.
Blended Exclusively with Organic Plant and Fruit Derived Terpenes
Terpenes are potent aromatic molecules in nature that give fruits and plants their unique scent, taste, and feel. Each little terpene is special in its own way and studies suggest they may even have unique effects on the body. Each of FTP’s terpene blends contains different amounts of over 30 different terpenes. Using so many different terpene blends enhances all of their products putting them in a class of their own. Google the terpenes you see in their lab results to find what terpene blend best suites your needs. Don’t forget, everyone’s body is different and different terpenes may appeal to you more than another person. Listen to your body and experiment with all their amazing blends.
– Stainless steel housing body, 100% pure quartz tank, ceramic coil heating element, and stainless steel mouthpiece
– Built-in adjustable airflow band on cartridge tip
– 510 thread
– 30% CBD
– Not compatible with a buttonless battery
– 11mm at the widest part
Full spectrum CBD distillate with organic plant and fruit derived terpenes.